lklab

High-speed Spinning of Nonwovens of 1 meter wide.Electrospinning System of High Productivity and Operability. The model NF-1001 is an electrospinning system to spin nanofiber nonwovens to be used for pilot production.A variety of solutions can be efficiently spun into nonwoven rolls of 1 meter wide(effective width).The system is also equipped with several devices thinking about operators’ safety. Major features Specification of each unit (outline) Model name NF-1001 Purpose of use Research and development, Pilot production of nonwovens Typical nanofibers to spin Steel belt width: 1300mmNonwovens Effective width: 1000mm Spinneret Multi-jet spinneret (MJS)(Quantities, number of holes and arrangement will be changed in accordance with solutions and conditions.) Standard collector（Steel belt） Steel belt Control PLC / Touch panel Spinning distance 100 to 400mm High voltage power supply (Positive polarity) 0.5 to 50.0kV High voltage power supply (Negative polarity) -0.5 to -30.0kV Traverse speed Traversing range: 400mm (+/- 200mm)Traversing speed: 0 to 300mm/sec Conveyor speed 1.5m/min or less Dimensions (except protrusions) 2900W x 2412D x 2330H (mm) Weight 3300kg or less Gear pump 3 units can be installed Feed rate of solutionpump 1, 2, 3 50 to 500ml/hour Solution viscosity 100～5000mPa・S Capacity of solutions tank 310W x 380D x 570H (mm) Lamp For chamber and spinnerets Safety devices ・Safety interlock・Door lock・Emergency switch・Signal tower・Exhaust sensor・Immediate shutoff of high voltage output after POWER OFF・Immediate shutoff of high voltage output when overcurrent flows.

• Able to dry quickly and conveniently with hot wind• As an assembly, it is adjustable the height of the shelf and facilitates assembly and decomposition• Prevent contamination from the dust by using translucent curtains which are included as standard• Water trap, wheel, and 4 shelves which have different sizes of the hole are included as standard• Able to set drying temperature• Able to set the timer• LK Labkorea Cat. No Model Description C04-02-100 LD-700 w700 x d450 x h1600 mm C04-02-150 LD-900 w900 x d450 x h1600 mm Cat. No. C04-02-100 C04-02-150 Model LD-700 LD-900 Size (w x d x h) w700 x d450 x h1600 mm w900 x d450 x h1600 mm Control  Controller Digital PID Controller Temperature Ambient +10 °C ~50 °C / 0.1 °C Resoluton Timer 1min ~ 99hr 59min or Continouos Material Main Frame 304 Stainless Steel Contol Box Powder Coated Steel ElectricSupply Power 1 Phase / 220Vac / 50/60 Hz Max Consumption 500 W (2.3 A) Power Line Standard Plug Shelf hole (mm) 1st (85 x 85), 2nd (50 x 50), 3rd (36 x 36), 4th (25 x 25) Safety Over Temp. & Over Current Protection Optional Accessory (If you want to buy 1 set, you need to order 2 units) Cat. No. Model Description R01-11-920 LWRM011 Spare Curtain for LD-700 R01-11-926 LWRM012 Spare Curtain for LD-90

• Able to dry quickly and conveniently with hot wind• As an assembly, it is adjustable the height of the shelf and facilitates assembly and decomposition• Prevent contamination from the dust by using translucent curtains which are included as standard• Water trap, wheel, and 4 shelves which have different sizes of the hole are included as standard• Able to set drying temperature• Able to set the timer• LK Labkorea Cat. No Model Size (w×d×h) R01-11-160 LWRM001N 700×450×1600 mm R01-11-166 LWRM002N 900×450×1600 mm R01-11-172 LWRM003N 1200×450×1600 mm Spare Curtain (If you want to buy 1 set, you need to order 2 units) Cat. No Model 규격 R01-11-920 LWRM011N for WRM001N R01-11-926 LWRM012N for WRM002N R01-11-928 LWRM013N for WRM003N

• To condensate of harmfulness substance or fume from the vacuum line• No heating medium oil is necessary for eliquating the solvent by a direct cooling method using a cooling coil• Convenient for use when the amount of trapping substance is large• Unable temperature control• Compact low-noise type cold trap bath• Handy with maintaining compressor with detachable front cover construct and good efficiency• Installing drain tap for an easier drain from bath• Simple and intuitive user interface with graphic LCD display• Temperature calibration function• Automatic fault sensing system; bath itself can detect an unusual situation (patent registration)• LK Labkorea

 To condensate of harmfulness substance or fume from the vacuum line• Temperature control available• Using 2 handy glass traps (including with delivery)• Compact type cold trap with lower noise• Handy with maintaining compressor with detachable front cover construct and good efficiency• Installing drain tap for an easier drain from bath• Simple and intuitive user interface with graphic LCD display• Temperature calibration function• Automatic fault sensing system; bath itself can detect an unusual situation (patent registration)• LK Labkorea

 Maintaining uniform temperature inside the bath with inner circulation function• Using high precision temperature sensor. Excellent temperature accuracy• 10 steps flow rate control• Precision control Implementation by 0.01°C• Installing a drain tap for an easier drain from bath• To control the temperature lower than the ambient temperature or to maintain the temperature precisely   need to connect a separate cooler to a cooling line (optional)• Lower temperature ranges are different depending on the capacity of the optional cooler connected• Available to observe through tempered glass window installed front and rear of equipment• Installed ports for external sensor and RS485 for PC communication  (communication program can be downloaded on www.lklab.com)• Simple and intuitive user interface with graphic LCD display• Auto tuning and temperature calibration function installed• Automatic fault sensing system; bath itself can detect an unusual situation (patent registration)• Low water alarm for heater’s overheating avoiding due to lack of liquid inside a bath• Double overheat safety device ‒ 1st controller overheat alarm, 2nd overheat shut off a circuit• LK Labkorea

• Control the temperature of equipment or user’s facilities by circulating liquid (Water, Alcohol)• Suitable to use for heat removal or controlling the temperature on lab equipment, medical devices,   measuring instruments, and semiconductor equipment• Able to control the temperature higher than the surrounding temperature by applying the heater• Ability of strong circulation that 40 liters can be circulated in a minute• High-temperature stability on ± 0.1°C• Applied 4.3” touch panel controller• Inserted exterior sensor and alarm port that can be connected directly with user’s equipment• Able to check the situation of the temperature changes with the graph• Alarm function for low-water level and high temperature• Installed ports for external sensor and RS485 for PC communication  (communication program can be downloaded on www.lklab.com)• No cooling water is necessary by an air cooling type structure• Convenient maintenance by the clip-on structure of a freezer condenser grill• LK Labkorea

 Maximum Space Saving by Horizontal Type of Design• Precision Control Implementation by 0.01°C• Installed Ports for External Sensor and RS485 for PC Communication• Maintaining Uniform Temperature Inside the Bath with Inner Circulation Function• Suitable for Using Together with Other Instrument with Powerful Motor• Simple and Intuitive User Interface with Graphic LCD Display• 10 Steps Pump Power (Flow Rate) Controller• Auto Tuning and Temperature Calibration Function installed• 2 type timer function installed• Using a Fluid other than Water (Oil, Alcohol, Antifreeze) can be Widely Used to Control  the Temperature Environment• Automatical Fault Sensing System (Bath itself can detect an unusual situation)• Double Overheat Safety Device – 1st Controller Overheat Alarm, 2nd Overheat Shut Off Circuit• Low Water Alarm for Heater’s Overheating Avoiding Due to Rack of Liquid inside Bath• LK Labkorea

Providing Various Researching Environment with Wider Ranges of Temperature Ability (-40 ~ 250°C)• Precision Control Implementation by 0.01°C• Installed Ports for External Sensor and RS485 for PC Communication• Maintaining Uniform Temperature Inside the Bath with Inner Circulation Function• Suitable for Using Together with Other Instrument with Powerful Motor• Simple and Intuitive User Interface with Graphic LCD Display• 10 Steps Pump Power (Flow Rate) Controller• Auto Tuning and Temperature Calibration Function installed• 2 type timer function installed• Using a Fluid other than Water (Oil, Alcohol, Antifreeze) can be Widely Used to  Control the Temperature Environment• Automatical Fault Sensing System (Bath itself can detect an unusual situation.)• Double Overheat Safety Device – 1st Controller Overheat Alarm, 2nd Overheat Shut Off Circuit• Low Water Alarm for Heater’s Overheating Avoiding Due to Rack of Liquid inside Bath• LK Labkorea

 Suitable for use together with other instruments with a powerful circulation pump• 10 steps pump power (flow rate) controller• Precision control Implementation by 0.01°C• Maintaining uniform temperature inside the bath with inner circulation function• Using fluid other than water (oil, alcohol, antifreeze) can be widely used to control  the temperature environment• Installed ports for external sensor and RS485 for PC communication  (communication program can be downloaded on www.lklab.com)• Simple and intuitive user interface with graphic LCD display• Auto tuning and temperature calibration function installed• 2 type timer function installed; start at the same time as driving or start after reaching the target temperature• Automatic fault sensing system; bath itself can detect an unusual situation (patent registration)• Low water alarm for heater’s overheating avoiding due to lack of liquid inside a bath• Double overheat safety device ‒ 1st controller overheat alarm, 2nd overheat shut off circuit• LK Labkorea