admin

NF-1001

High-speed Spinning of Nonwovens of 1 meter wide.Electrospinning System of High Productivity and Operability. The model NF-1001 is an electrospinning system to spin nanofiber nonwovens to be used for pilot production.A variety of solutions can be efficiently spun into nonwoven rolls of 1 meter wide(effective width).The system is also equipped with several devices thinking about operators’ safety. Major features Specification of each unit (outline) Model name NF-1001 Purpose of use Research and development, Pilot production of nonwovens Typical nanofibers to spin Steel belt width: 1300mmNonwovens Effective width: 1000mm Spinneret Multi-jet spinneret (MJS)(Quantities, number of holes and arrangement will be changed in accordance with solutions and conditions.) Standard collector(Steel belt) Steel belt Control PLC / Touch panel Spinning distance 100 to 400mm High voltage power supply (Positive polarity) 0.5 to 50.0kV High voltage power supply (Negative polarity) -0.5 to -30.0kV Traverse speed Traversing range: 400mm (+/- 200mm)Traversing speed: 0 to 300mm/sec Conveyor speed 1.5m/min or less Dimensions (except protrusions) 2900W x 2412D x 2330H (mm) Weight 3300kg or less Gear pump 3 units can be installed Feed rate of solutionpump 1, 2, 3 50 to 500ml/hour Solution viscosity 100~5000mPa・S Capacity of solutions tank 310W x 380D x 570H (mm) Lamp For chamber and spinnerets Safety devices ・Safety interlock・Door lock・Emergency switch・Signal tower・Exhaust sensor・Immediate shutoff of high voltage output after POWER OFF・Immediate shutoff of high voltage output when overcurrent flows.

NF-1001 Read More »

NF-500

NF-500Electrospinning system for lab use The model NF-500 is an electrospinning system that spins large nanofiber samples and long sheets.The high-end equipment integrates a 50kV high voltage supply and a solution heating spinneret. Major features Performance Model name NF-500 Purpose of use Research and development Typical nanofibers to spin 450mm-wide nonwovensAligned membraneCore/shell nanofiberPorous fiber Standard spinneret Clip Optional spinneret Vertical ClipTubelessCoaxialMJS 4, 6, 8 holesSolution heating11-syringe clipBNP(Bit Nozzle Pipe) Spinneret Standard collector Plate Optional collector Drum φ200 w200(up to 3000rpm)Drum φ100 w200(up to 3000rpm)Drum φ200 w30(up to 3000rpm)Drum φ200 w300(up to 100rpm)Drum φ200 w600(up to100rpm)Disk(up to 3000rpm)Mandrel (up to 100rpm)Roll to roll 450mm/500mmY-axis Slide Pump Syringe pump 2 sets (To mount 3 syringes each) High voltage power supply Voltage: 0.1 to 50.0kVCurrent: 0.0 to 100.0μA Traversing speed 0 to 300mm/sec Rotation speed of collectors Drum; 100 to 3000rpmDisk; 100 to 3000rpmMandrel; 50 to100rpm Spinning distance 50 to 300mm Programmable parameter ・High voltage output・Feed rate of solutions from pump・Rotation speed of collector・Up/down moving distance of slider (semi-automatic)・Frequency and interval of cleaning・Traversing speed and distance Inhaling and exhausting volume of fan 60㎥/hr or more Feed rate 0.1 to 60ml/hr Capacity of syringes 2.0 / 5.0 / 10.0/ 20.0 (ml) Control Touch panel External dimensions (Except protrusions) 1460W x 950D x 1903H (mm) Weight 700kg or less Safety devices ・Safety interlock・Door lock・Emergency stop button・Signal tower・Air supply filter and exhaust gas purification filter・Immediate shutoff of high-voltage output after POWEROFF・Shutoff of high voltage output when over-current flows

NF-500 Read More »

BTA210D

Precise technical scales of BTA series are designed for applications where EC verification is not required. Their advantages: small dimensions, power supply from accumulators or  batteries, high measurement resolution and low price. BTA series have a full set of special functions.

BTA210D Read More »

BTA2100D

Precise technical scales of BTA series are designed for applications where EC verification is not required. Their advantages: small dimensions, power supply from accumulators or  batteries, high measurement resolution and low price. BTA series have a full set of special functions.

BTA2100D Read More »

BTS110D

Moisture analyzers of BTS series are used for quick and precise determination of material humidity upon the basis of weight loss during drying of its small sample (thermo-gravimetrical method). Halogen radiators ensure efective sample drying. BTS functioning is based on strain gauge which is very popular in other industrial applications.    Time, temperature and drying profile (course) can be adapted to examinated material features. To simplify drying parameters choice, initial drying can be done with graph result.The RS232C connection permits to connect a printer or a computer in order to print receipts, raports or further processing weighing results. The printed raports enable fulfilment of GLP recommendation. Temperature correction (option): Special functions:– 4 drying profiles: standard, slow, step and fast– 20 drying settings memory

BTS110D Read More »

NANON

Electrospinning System for R & D The  model NANON-01B is a best-selling nanofiber electrospinning system for lab use.A variety of materials can be spun by programming spinning conditions and combining system parts such as spinnerets and collectors. Major features Performance Model name NANON Purpose of use Research and development Typical nanofibers to spin Nonwovens of double size of A4 (200mm x 600mm)Aligned membraneCore/shell nanofiberPorous fiber Standard spinneret Clip Optional spinneret Vertical ClipTubelessCoaxialMultiple jet; 4-holes Standard collector Plate Optional collector Drum φ200 w200(up to 3000rpm)Drum φ100 w200(up to 3000rpm)Drum φ200 w30(up to 3000rpm)Disk(up to 3000rpm)Mandrel (up to 100rpm)Roll to roll 200mmY-axis Slide Pump Syringe pump 2 sets (To mount 3 syringes each) High voltage power supply Voltage: 0.5 to 30.0kVCurrent: 0.0 to 50.0μA Traversing speed 300mm/sec Rotation speed of collectors Drum; 100 to 3000rpmDisk; 100 to 3000rpmMandrel; 50 to 100rpm Spinning distance 50 to 150mm Programmable parameter ・High voltage output・Feed rate of solutions from pump・Rotation speed of collector・Up/down moving distance of slider (semi-automatic)・Frequency and interval of cleaning・Traversing speed and distance Inhaling and exhausting volume of fan 12㎥/hr or more Feed rate 0.1 to 100ml/hr Capacity of syringes 2.0 / 5.0 / 10.0 (ml) Control 10-key External dimensions (Except protrusions) 830W x 615D x 875H (mm) Weight 110kg or less Safety devices ・Safety interlock・Door lock・Emergency stop button・Signal tower・Exhaust purification filter・Immediate shutoff of high-voltage output after POWEROFF・Shutoff of high voltage output when over-current flows

NANON Read More »

ACN220

rofessional scales of the ACN and ACE series are equipped with RS232C (connection with a barcode reader or printer), USB-B (computer), and USB-A (flash drive, printer, or computer keyboard). The scales have a large LCD (size of digits 18mm), a standard keyboard, and many special functions. The spacious weighing chamber closed with sliding panes on three sides, enables convenient and effective work in rooms where it is impossible to eliminate air movement. Alibi memory ensures the safety and archiving of measurements (up to 100,000). Measurements can be downloaded from the scale to a computer and viewed on the computer. ACN is equipped with an internal calibration system

ACN220 Read More »

Electronic Wire Drying Rack

• Able to dry quickly and conveniently with hot wind• As an assembly, it is adjustable the height of the shelf and facilitates assembly and decomposition• Prevent contamination from the dust by using translucent curtains which are included as standard• Water trap, wheel, and 4 shelves which have different sizes of the hole are included as standard• Able to set drying temperature• Able to set the timer• LK Labkorea Cat. No Model Description C04-02-100 LD-700 w700 x d450 x h1600 mm C04-02-150 LD-900 w900 x d450 x h1600 mm Cat. No. C04-02-100 C04-02-150 Model LD-700 LD-900 Size (w x d x h) w700 x d450 x h1600 mm w900 x d450 x h1600 mm Control  Controller Digital PID Controller Temperature Ambient +10 °C ~50 °C / 0.1 °C Resoluton Timer 1min ~ 99hr 59min or Continouos Material Main Frame 304 Stainless Steel Contol Box Powder Coated Steel ElectricSupply Power 1 Phase / 220Vac / 50/60 Hz Max Consumption 500 W (2.3 A) Power Line Standard Plug Shelf hole (mm) 1st (85 x 85), 2nd (50 x 50), 3rd (36 x 36), 4th (25 x 25) Safety Over Temp. & Over Current Protection Optional Accessory (If you want to buy 1 set, you need to order 2 units) Cat. No. Model Description R01-11-920 LWRM011 Spare Curtain for LD-700 R01-11-926 LWRM012 Spare Curtain for LD-90

Electronic Wire Drying Rack Read More »

Wire Drying Rack with Curtain

• Able to dry quickly and conveniently with hot wind• As an assembly, it is adjustable the height of the shelf and facilitates assembly and decomposition• Prevent contamination from the dust by using translucent curtains which are included as standard• Water trap, wheel, and 4 shelves which have different sizes of the hole are included as standard• Able to set drying temperature• Able to set the timer• LK Labkorea Cat. No Model Size (w×d×h) R01-11-160 LWRM001N 700×450×1600 mm R01-11-166 LWRM002N 900×450×1600 mm R01-11-172 LWRM003N 1200×450×1600 mm Spare Curtain (If you want to buy 1 set, you need to order 2 units) Cat. No Model 규격 R01-11-920 LWRM011N for WRM001N R01-11-926 LWRM012N for WRM002N R01-11-928 LWRM013N for WRM003N

Wire Drying Rack with Curtain Read More »

Vacuum Cold Trap Bath

• To condensate of harmfulness substance or fume from the vacuum line• No heating medium oil is necessary for eliquating the solvent by a direct cooling method using a cooling coil• Convenient for use when the amount of trapping substance is large• Unable temperature control• Compact low-noise type cold trap bath• Handy with maintaining compressor with detachable front cover construct and good efficiency• Installing drain tap for an easier drain from bath• Simple and intuitive user interface with graphic LCD display• Temperature calibration function• Automatic fault sensing system; bath itself can detect an unusual situation (patent registration)• LK Labkorea

Vacuum Cold Trap Bath Read More »